Better Life Technology, LLC Roll-Out Garage and Concrete Floor Covers • World's Largest Producer of Garage Floor Protector Mats • Producer of the World's Widest Roll-Out Garage Floor Covering

—» Introduced in 2007 «— Clear Roll-Out Floor Covering
G-Floor® clear floor protector shows off your beautiful floor • Vinyl flooring protects epoxy, tile, paint, and stains from damage. • The unique ribbed surface pattern channels liquids and debris out of the garage. • Helps prevent damage caused by chemicals typically found on garage and workshop floors. • As with all G-Floor® products, roll-out installation is easy. Potential uses for this material are virtually the same as those for our Rib-Channel pattern product.
Clear Roll-Out Floor Protection is available in 2 of the standard G-Floor® patterns	Ribbed-Channel Pattern
	Levant Surface Pattern
How does G-FLOOR® Roll-Out Garage Flooring compare with other vinyl floor coverings? BLT G-Floor is 100% high quality polyvinyl throughout the entire product. Most other floor coverings only use high quality materials on the top 10%–20% of their product and laminate with lower-grade material that does not offer the same protection throughout. Some products even have three layers of filler using some of the poorest quality materials available. G-Floor is solid polyvinyl and has the same resistances throughout the entire product top to bottom. G-Floor is superior to all other floor coverings that you can drive and walk on.
Show off and protect your beautiful garage tile floor with G-Floor ® clear roll-out floor protectors
Recently, Canadian Garage Outfutters, a G-Floor ® vendor, sponsored an installation of ribbed-pattern clear roll-out flooring over interlocking, drain-through garage floor tile.
CAUTION—SAFETY WARNING: Any floor surface can become slippery in the presence of moisture and debris. Proper care and cleaning of vinyl flooring will reduce the likelihood of slips and falls. Wipe up any oil, chemicals, or other fluids that may drip or leak from vehicle to prevent hazardous, slippery conditions. Always dispose of hazardous materials properly. IS G-Floor® A SLIP-RESISTANT FLOORING PRODUCT? Although the patterned design of BLT flooring offers somewhat improved traction compared to bare concrete, BLT makes no claim of G-Floor being slip-proof or slip-resistant. There is no substitute for keeping a clean, well-maintained floor.
	NOTE: For 55 mil Ribbed Pattern, Base thickness = 55 mil (0.055"—1.4 mm) Overall flooring height = 110 mil (0.110"—2.8 mm) For 55 mil Levant Pattern, Base thickness = 55 mil (0.055"—1.4 mm) Overall flooring height = 55 mil (0.055"—1.4 mm)
Easy Installation of Roll-Out Garage Flooring 30 to 60 minutes Minimal tools!—No adhesives required!
Simply unroll Trim and overlap if needed Taping is optional* *3-M® brand 80 Rubber & Vinyl Spray Adhesive may also be used if desired.
Product Cleaning and Care of BLT Roll-Out Garage Flooring
• Surface is easily washed with soap and water. Product can be easily washed off inside or outside of garage. Brush or sweep with cool water using a broom or sponge squeegee. Mild soaps and normal household detergents may be used. Do not leave harsh detergents or chemicals on product or wash into sewer system. Some people prefer moving the product outside and hosing it off.   • Normal household vinyl cleaners may be used to increase longevity and to remove stubborn debris. Certain automotive vinyl products may cause surface to become slippery. Use a non-slip vinyl protector such as a clean-and-shine floor cleaner.   • This is not a stain-proof product—certain dyes, inks, rubber tires, and chemicals may cause permanent staining. Some of our customers have reported that spray-on Brake and Tool Cleaner, found in many auto parts stores, will remove some stubborn stains without damaging the product. However, use of brake and tool cleaner may cause product discoloration. Never use harsh chemicals such as tar remover or kerosene on this product.   • After cleaning, apply a coat of floor polish for vinyl floors to add a long-lasting, high-luster finish, even to older garage floor protectors. NOTE: Leaving chemicals on the product for a long period of time may cause damage. If concrete floor has been treated with certain sealers prior to mat installation, sealer may break down over time and adhere to back of mat without causing damage to mat. Some motorcycle kickstands may cut or damage this product. For specific questions regarding: product installation, care, or cleaning, please contact Customer Service at Better Life Technology
For infomation regarding becoming a distributor or installer of BLT Flooring or making large purchases of BLT flooring, please email: sales@bltllc.com
[Return to BLT home]	[Return to Floor Protection home ]
Copyright © 2009 Better Life Technology, LLC 9812 Pflumm Road Lenexa, KS 66215 913-894-0403 All photos, text, and other materials used on this website are the property of Better Life Technology, LLC and may not be used without written permission. NOTE: The Parking Pad and G-FLOOR logos and names are registered trademarks of Better Life Technology, LLC. ALSO, The phrase "BLT Roll-Out Garage Flooring" is a registered trademark of Better Life Technology, LLC. In Addition, the X-treme Protection and X-treme Garage logos are trademarks of Better Life Technology, LLC.
BLT Flooring Articles   Links BLT Site Map